A
-
A. Abdollahi,
Investigation of Molybdenum Disilicide, Boron Carbide and Silicon Carbide Particles on Flexural Strength and Pressureless Sintering Behavior of ZrB2-HfB2 Ultra High Temperature Composite [Volume 33, Issue 2, 2015, Pages 85-97]
-
A. Doostmohamadi,
Synthesis and Characterization of Glass IonomerâForsterite Nanocomposites and Study of the Effect of Adding Forsterite Nanoparticles on Mechanical Properties and Bioactivity [Volume 33, Issue 3, 2015, Pages 21-35]
-
Akbar Khodaparast Haghi,
The Development of Textile Based Microstrip Antenna Using Inkjet Printing [Volume 33, Issue 3, 2015, Pages 61-78]
-
Ali Ghasemi,
Effect of Mechanical Milling Treatment and Reaction Temperature on the Fabrication of Silicon Nitride [Volume 33, Issue 3, 2015, Pages 51-59]
-
A. Mashreghi,
Fabrication and Characterization of Nickel Ferrite Based Inert Anodes for Aluminum Electrolysis [Volume 33, Issue 3, 2015, Pages 125-140]
-
A.Mirhabibi,
Evaluating Mechanical Properties of Two Directional Carbon-Carbon Composites Based on Texture of Wood [Volume 33, Issue 1, 2014, Pages 1-9]
-
A. Sadeghzadeh Attar,
Synthesis and Evaluation of Corrosion Behavior of Al2O3/MgO/TiO2 Mixed-Metal Oxides Coating by Sol-Gel Method on Al Substrate [Volume 33, Issue 2, 2015, Pages 17-30]
-
A. Saidi,
Effect of Milling Time on TixAly/Al2O3 Ceramic Matrix Nanocomposite Synthesis Using the Mechanochemical Method [Volume 33, Issue 2, 2015, Pages 55-64]
B
-
B. Eftekhari Yekta,
Survey on the Influence of Temperature and Holding Time on Synthesis of Hercynite by Molten Salt Method [Volume 33, Issue 2, 2015, Pages 75-84]
D
-
D. Ghasemi,
Characterization and Formation Mechanism of Aluminum Based Nanocomposites Reinforced with TiO2 Particles by Mechanical Milling [Volume 33, Issue 2, 2015, Pages 99-106]
F
-
F. Agend,
Investigation of Sensory Properties of Nanostructure Tin Oxide Layers Deposited by Thermal Evaporation and Sputtering Methods Compared to Ethanol [Volume 33, Issue 2, 2015, Pages 65-74]
-
Fatemeh Mohtaram,
The Development of Textile Based Microstrip Antenna Using Inkjet Printing [Volume 33, Issue 3, 2015, Pages 61-78]
-
F. Karimzadeh.,
Analyzing Mechanical Properties of Transient Liquid Phase Bonding of Al2O3p/Al Nanocomposite Using Copper Interlayer [Volume 33, Issue 1, 2014, Pages 63-76]
-
F. Mohammadi,
Effect of MgCl2 Addition on the Kinetics of MA Spinel Formation [Volume 33, Issue 1, 2014, Pages 93-103]
-
F. Shirani,
Synthesis and Characterization of Glass IonomerâForsterite Nanocomposites and Study of the Effect of Adding Forsterite Nanoparticles on Mechanical Properties and Bioactivity [Volume 33, Issue 3, 2015, Pages 21-35]
-
F.S. Sayyedan,
Synthesis and Characterization of Glass IonomerâForsterite Nanocomposites and Study of the Effect of Adding Forsterite Nanoparticles on Mechanical Properties and Bioactivity [Volume 33, Issue 3, 2015, Pages 21-35]
G
-
G. H. Borhani,
Phase Evaluation of Alloyed and Composed Molybdenum disilicide by Al and TiC [Volume 33, Issue 1, 2014, Pages 21-31]
-
Gholamreza Baghersalimi,
The Development of Textile Based Microstrip Antenna Using Inkjet Printing [Volume 33, Issue 3, 2015, Pages 61-78]
H
-
H. Abbaszadeh,
The Effect of Different Activation Methods on Microstructure, Hardness and Densification Behavior of Sintered Mo Powder [Volume 33, Issue 1, 2014, Pages 11-20]
-
H. Abdizadeh,
Synthesis of Nano Powder Zirconium Carbide (ZrC) Using Self-Propagating High Temperature [Volume 33, Issue 3, 2015, Pages 79-89]
-
H. Baharvandee,
Synthesis of Nano Powder Zirconium Carbide (ZrC) Using Self-Propagating High Temperature [Volume 33, Issue 3, 2015, Pages 79-89]
-
H. Edris,
Synthesis and Characterization of Glass IonomerâForsterite Nanocomposites and Study of the Effect of Adding Forsterite Nanoparticles on Mechanical Properties and Bioactivity [Volume 33, Issue 3, 2015, Pages 21-35]
-
H. Ghassai,
Investigation of Key Factors on Manufacture of Fused Silica Parts by Gel-Casting Method [Volume 33, Issue 1, 2014, Pages 117-126]
-
H. R. Jahedmotlagh,
Effect of Equal Channel Angular Pressing on Microstructure of AM30 Magnesium Alloy [Volume 33, Issue 3, 2015, Pages 13-20]
-
H.R. SalimiJazi,
Analyzing Mechanical Properties of Transient Liquid Phase Bonding of Al2O3p/Al Nanocomposite Using Copper Interlayer [Volume 33, Issue 1, 2014, Pages 63-76]
-
H. Salami Jazi,
Evaluation of Electric Current Effect on the Microstructure and Wear Behavior of Cast Al Base Alloys [Volume 33, Issue 1, 2014, Pages 77-92]
-
H. Sarpoolaki,
Investigation of Key Factors on Manufacture of Fused Silica Parts by Gel-Casting Method [Volume 33, Issue 1, 2014, Pages 117-126]
K
-
K. Janghorban,
Evaluating the Effect of Yittria Addition on the Mullite-Zirconia Composites Manufactured by Slip Casting Method [Volume 33, Issue 1, 2014, Pages 49-61]
-
K.Janghorban,
Erratum to: Effect of Yittria Addition on the Mullite-Zirconia Composites Manufactured by Slip Casting Method [Volume 33, Issue 2, 2015, Pages 121-122]
-
K. Raeissi,
The Influence of Anodising Voltage on Tribocorrosion Behavior of Anodized Ti-6Al-4V Alloy [Volume 33, Issue 3, 2015, Pages 37-49]
-
K. Raeissi,
The Influence of Anodising Voltage on Tribocorrosion Behavior of Anodized Ti-6Al-4V Alloy [Volume 33, Issue 3, 2015, Pages 37-49]
-
K. Sheybani,
A Kinetic Study on the Carbothermic Reduction of Molybdenite in the Presence of Sodium Carbonate [Volume 33, Issue 2, 2015, Pages 107-120]
-
K. Zangeneh-madar,
The Effect of Different Activation Methods on Microstructure, Hardness and Densification Behavior of Sintered Mo Powder [Volume 33, Issue 1, 2014, Pages 11-20]
L
-
L. Akbarshahi,
Investigation of Key Factors on Manufacture of Fused Silica Parts by Gel-Casting Method [Volume 33, Issue 1, 2014, Pages 117-126]
M
-
M.A. Golozar,
The Influence of Anodising Voltage on Tribocorrosion Behavior of Anodized Ti-6Al-4V Alloy [Volume 33, Issue 3, 2015, Pages 37-49]
-
M.A. Golozar,
The Influence of Anodising Voltage on Tribocorrosion Behavior of Anodized Ti-6Al-4V Alloy [Volume 33, Issue 3, 2015, Pages 37-49]
-
M. Ahmadi,
Effect of Carbon Nanotube Content on Cell Morphology of Nanocomposite Microcellular PC/EPDM Foams [Volume 33, Issue 2, 2015, Pages 31-42]
-
M. Ahmadi,
Effect of Carbon Nanotube Content on Cell Morphology of Nanocomposite Microcellular PC/EPDM Foams [Volume 33, Issue 2, 2015, Pages 31-42]
-
M. Alizadeh,
An Investigation of the Effects of Cold Rolling and Annealing on the Corrosion and Tensile Behaviors of Al/Steel Multilayer Composite [Volume 33, Issue 2, 2015, Pages 1-15]
-
M. Alizadeh,
Synthesis and Evaluation of Corrosion Behavior of Al2O3/MgO/TiO2 Mixed-Metal Oxides Coating by Sol-Gel Method on Al Substrate [Volume 33, Issue 2, 2015, Pages 17-30]
-
M. Daneshmand,
Effect of Cellular Structure of A356-10 vol.%SiC Composite Aluminum Foam on Progressive Quasi-Static Axial Buckling Behavior of Brass Crush-Box [Volume 33, Issue 3, 2015, Pages 105-124]
-
M. Ehteshamzadeh,
An Investigation of the Effects of Cold Rolling and Annealing on the Corrosion and Tensile Behaviors of Al/Steel Multilayer Composite [Volume 33, Issue 2, 2015, Pages 1-15]
-
M. Esmaeeli,
Evaluating Mechanical Properties of Two Directional Carbon-Carbon Composites Based on Texture of Wood [Volume 33, Issue 1, 2014, Pages 1-9]
-
M.Golzar,
Ultimate Strain and Anisotropic Behavior in Corrugated Composites [Volume 33, Issue 1, 2014, Pages 33-48]
-
M.H. Abbasi,
A Kinetic Study on the Carbothermic Reduction of Molybdenite in the Presence of Sodium Carbonate [Volume 33, Issue 2, 2015, Pages 107-120]
-
M.H. Fathi,
Synthesis and Characterization of Glass IonomerâForsterite Nanocomposites and Study of the Effect of Adding Forsterite Nanoparticles on Mechanical Properties and Bioactivity [Volume 33, Issue 3, 2015, Pages 21-35]
-
M. H. Ghezel ayagh,
Investigation of Sensory Properties of Nanostructure Tin Oxide Layers Deposited by Thermal Evaporation and Sputtering Methods Compared to Ethanol [Volume 33, Issue 2, 2015, Pages 65-74]
-
M. Kalantar,
Fabrication and Characterization of Nickel Ferrite Based Inert Anodes for Aluminum Electrolysis [Volume 33, Issue 3, 2015, Pages 125-140]
-
M. Mashhadi,
Investigation of Molybdenum Disilicide, Boron Carbide and Silicon Carbide Particles on Flexural Strength and Pressureless Sintering Behavior of ZrB2-HfB2 Ultra High Temperature Composite [Volume 33, Issue 2, 2015, Pages 85-97]
-
M. Mosallaeepour,
Fabrication and Characterization of Nickel Ferrite Based Inert Anodes for Aluminum Electrolysis [Volume 33, Issue 3, 2015, Pages 125-140]
-
M. Rahmani,
Evaluating the Effect of Yittria Addition on the Mullite-Zirconia Composites Manufactured by Slip Casting Method [Volume 33, Issue 1, 2014, Pages 49-61]
-
M. Rahmani,
Erratum to: Effect of Yittria Addition on the Mullite-Zirconia Composites Manufactured by Slip Casting Method [Volume 33, Issue 2, 2015, Pages 121-122]
-
M.R. Garsivaz jazi,
The Influence of Anodising Voltage on Tribocorrosion Behavior of Anodized Ti-6Al-4V Alloy [Volume 33, Issue 3, 2015, Pages 37-49]
-
M.R. Nilforushan,
Effect of MgCl2 Addition on the Kinetics of MA Spinel Formation [Volume 33, Issue 1, 2014, Pages 93-103]
-
M.R. Toroghinejad,
Analyzing Mechanical Properties of Transient Liquid Phase Bonding of Al2O3p/Al Nanocomposite Using Copper Interlayer [Volume 33, Issue 1, 2014, Pages 63-76]
-
M. Sedighi,
Effect of Equal Channel Angular Pressing on Microstructure of AM30 Magnesium Alloy [Volume 33, Issue 3, 2015, Pages 13-20]
-
M. Shamanian,
A Kinetic Study on the Carbothermic Reduction of Molybdenite in the Presence of Sodium Carbonate [Volume 33, Issue 2, 2015, Pages 107-120]
-
M. Soltanieh,
Survey on the Influence of Temperature and Holding Time on Synthesis of Hercynite by Molten Salt Method [Volume 33, Issue 2, 2015, Pages 75-84]
-
M. Talebian,
An Investigation of the Effects of Cold Rolling and Annealing on the Corrosion and Tensile Behaviors of Al/Steel Multilayer Composite [Volume 33, Issue 2, 2015, Pages 1-15]
-
M. Tehrani Dehkordi,
Effect of Different Parameters on Charpy Impact Properties of Quasi-Isotropic Epoxy Composites Reinforced with Basalt and Glass Fibers [Volume 33, Issue 3, 2015, Pages 91-103]
-
M. Yousefi,
Structural and Magnetic Characterization of (Fe65-Co35)100-xSix Alloy Obtained by Mechanical Alloying [Volume 33, Issue 1, 2014, Pages 105-116]
P
-
P.Ghabezi,
Ultimate Strain and Anisotropic Behavior in Corrugated Composites [Volume 33, Issue 1, 2014, Pages 33-48]
-
P. Safaie,
Phase Evaluation of Alloyed and Composed Molybdenum disilicide by Al and TiC [Volume 33, Issue 1, 2014, Pages 21-31]
-
P. Zarrabian,
Fabrication and Characterization of Nickel Ferrite Based Inert Anodes for Aluminum Electrolysis [Volume 33, Issue 3, 2015, Pages 125-140]
R
-
R. Emadi,
Evaluation of Electric Current Effect on the Microstructure and Wear Behavior of Cast Al Base Alloys [Volume 33, Issue 1, 2014, Pages 77-92]
-
R. Jahadi Naeini,
Effect of Equal Channel Angular Pressing on Microstructure of AM30 Magnesium Alloy [Volume 33, Issue 3, 2015, Pages 13-20]
-
R. Nategi Jahromi,
Effect of Different Parameters on Charpy Impact Properties of Quasi-Isotropic Epoxy Composites Reinforced with Basalt and Glass Fibers [Volume 33, Issue 3, 2015, Pages 91-103]
-
R. Tajalli,
Synthesis of Nano Powder Zirconium Carbide (ZrC) Using Self-Propagating High Temperature [Volume 33, Issue 3, 2015, Pages 79-89]
S
-
Saeed Reza Bakhshi,
Effect of Mechanical Milling Treatment and Reaction Temperature on the Fabrication of Silicon Nitride [Volume 33, Issue 3, 2015, Pages 51-59]
-
Sarpoolaky, Hosein
Survey on the Influence of Temperature and Holding Time on Synthesis of Hercynite by Molten Salt Method [Volume 33, Issue 2, 2015, Pages 75-84]
-
S. Borji,
The Effect of Different Activation Methods on Microstructure, Hardness and Densification Behavior of Sintered Mo Powder [Volume 33, Issue 1, 2014, Pages 11-20]
-
S. H. Bahrami,
Effect of Different Parameters on Charpy Impact Properties of Quasi-Isotropic Epoxy Composites Reinforced with Basalt and Glass Fibers [Volume 33, Issue 3, 2015, Pages 91-103]
-
Sh. Ebrahimi,
Effect of Carbon Nanotube Content on Cell Morphology of Nanocomposite Microcellular PC/EPDM Foams [Volume 33, Issue 2, 2015, Pages 31-42]
-
SH. Masoumi,
Survey on the Influence of Temperature and Holding Time on Synthesis of Hercynite by Molten Salt Method [Volume 33, Issue 2, 2015, Pages 75-84]
-
Sh. Seyyedin,
Investigation of Sensory Properties of Nanostructure Tin Oxide Layers Deposited by Thermal Evaporation and Sputtering Methods Compared to Ethanol [Volume 33, Issue 2, 2015, Pages 65-74]
-
S. Katiraei,
Mechanical Behavior of Porous Ni-Ti Alloy Produced by Bulk Combustion Synthesis Method for Bone Surgery [Volume 33, Issue 2, 2015, Pages 43-54]
-
S.M.H. Mirbagheri,
Effect of Cellular Structure of A356-10 vol.%SiC Composite Aluminum Foam on Progressive Quasi-Static Axial Buckling Behavior of Brass Crush-Box [Volume 33, Issue 3, 2015, Pages 105-124]
-
S. M. Hosseini-Golgoo,
Investigation of Sensory Properties of Nanostructure Tin Oxide Layers Deposited by Thermal Evaporation and Sputtering Methods Compared to Ethanol [Volume 33, Issue 2, 2015, Pages 65-74]
-
S. Mirtalebi,
Characterization and Formation Mechanism of Aluminum Based Nanocomposites Reinforced with TiO2 Particles by Mechanical Milling [Volume 33, Issue 2, 2015, Pages 99-106]
-
S. Otroj,
Evaluating the Effect of Yittria Addition on the Mullite-Zirconia Composites Manufactured by Slip Casting Method [Volume 33, Issue 1, 2014, Pages 49-61]
-
S. Otroj,
Effect of MgCl2 Addition on the Kinetics of MA Spinel Formation [Volume 33, Issue 1, 2014, Pages 93-103]
-
S. Otroj,
Erratum to: Effect of Yittria Addition on the Mullite-Zirconia Composites Manufactured by Slip Casting Method [Volume 33, Issue 2, 2015, Pages 121-122]
-
S. R. Bakhshi,
Phase Evaluation of Alloyed and Composed Molybdenum disilicide by Al and TiC [Volume 33, Issue 1, 2014, Pages 21-31]
-
S. Seyyedin,
The Effect of Different Activation Methods on Microstructure, Hardness and Densification Behavior of Sintered Mo Powder [Volume 33, Issue 1, 2014, Pages 11-20]
-
S. Sharafi,
Structural and Magnetic Characterization of (Fe65-Co35)100-xSix Alloy Obtained by Mechanical Alloying [Volume 33, Issue 1, 2014, Pages 105-116]
-
S.S. Sayyedain,
Analyzing Mechanical Properties of Transient Liquid Phase Bonding of Al2O3p/Al Nanocomposite Using Copper Interlayer [Volume 33, Issue 1, 2014, Pages 63-76]
V
-
Vahid Mottaghitalab,
The Development of Textile Based Microstrip Antenna Using Inkjet Printing [Volume 33, Issue 3, 2015, Pages 61-78]
-
V. Omrani Dizajyekan,
Evaluation of Electric Current Effect on the Microstructure and Wear Behavior of Cast Al Base Alloys [Volume 33, Issue 1, 2014, Pages 77-92]
-
V.S., Mortazavi,
Synthesis and Characterization of Glass IonomerâForsterite Nanocomposites and Study of the Effect of Adding Forsterite Nanoparticles on Mechanical Properties and Bioactivity [Volume 33, Issue 3, 2015, Pages 21-35]
Y
-
Y. Tabatabaie,
Effect of Cellular Structure of A356-10 vol.%SiC Composite Aluminum Foam on Progressive Quasi-Static Axial Buckling Behavior of Brass Crush-Box [Volume 33, Issue 3, 2015, Pages 105-124]
Z
-
Zahra Omidi,
Effect of Mechanical Milling Treatment and Reaction Temperature on the Fabrication of Silicon Nitride [Volume 33, Issue 3, 2015, Pages 51-59]
-
Z. Ansari,
Synthesis and Evaluation of Corrosion Behavior of Al2O3/MgO/TiO2 Mixed-Metal Oxides Coating by Sol-Gel Method on Al Substrate [Volume 33, Issue 2, 2015, Pages 17-30]
-
Z. Asghary,
The Effect of Different Activation Methods on Microstructure, Hardness and Densification Behavior of Sintered Mo Powder [Volume 33, Issue 1, 2014, Pages 11-20]
-
Z. Nasiri,
Investigation of Molybdenum Disilicide, Boron Carbide and Silicon Carbide Particles on Flexural Strength and Pressureless Sintering Behavior of ZrB2-HfB2 Ultra High Temperature Composite [Volume 33, Issue 2, 2015, Pages 85-97]
Your query does not match with any item